Luzheng Chen, Dahe Xiong, in Progress in Filtration and Separation, 2015. 2.1.4 Screen Magnetic Separator. Screen magnetic separator presents another magnetic technique for the cleaning of strongly magnetic minerals such as magnetite, based on the principle of magnetic agglomeration .
The unit is a wet, high intensity magnetic separator that uses a combination of magnetic force, pulsating fluid, and gravity to process minerals. The advanced features are incorporated into a design utilizing a unique vertical configuration, jigging action, and special matrix materials to achieve the best results.
Induction type high magnetic force separator KID R For removal of weak magnetic bulk materials. 2.6 T max. Cross belt type high magnetic force separator KID B Small capacity and less mixture of raw materials in removed iron.
Dry Separation at Finer Sizes
When a minus 325 mesh fraction is tested, a separation sometimes occurs, but in most cases the feed passes through without separation. Response at higher frequencies was investigated with a smaller ¾ inch cross section U shaped magnet core 1 . Separation was performed with a nonmagnetic nonconducting plane surface 3 moved manually across the magnet pole as illustrated by the direction arrow 4. When separation occurred, the nonmagnetic mineral 5 would move with the plane, and the magn...
See full list on
Application of alternating and intermittent current to magnetic separation at a relatively high number of ampere turns was made possible by special electronic circuits. Actual power losses are low and include the I²R loss, which is the same that occurs in direct current magnetic separation, and the core loss, which has a magnitude corresponding to the I²R loss. Minerals may be dry separated close to the minus 325 mesh size at 60 hertz frequency and possibly at smaller particle sizes at higher frequency. In the wet separation of minus 325 mesh feeds, intermittent current provides for complete release of the magnetic fraction during the discharge cycle. For matted fibrous and magnetically coagulating feeds, a cross belt separator with an intermittent magnetizing current provides efficient separations.
See full list on
A magnetic separator is a device that uses a magnet to remove impurities and other magnetic materials from metal. Magnetic separators can be used before, during and after the production of a material and can be adjusted to attract different types of magnetic materials at different intensity levels. Although its use is almost always industrial ...
Magnetic separator is used to separate either valuable minerals from non magnetic gangue,e.g. magnetite from quartz,or magnetic contaminants or other valuable minerals from nonmagnetic values,based on the difference in magnetic properties between the ore minerals.The property of a magnetic separator that determines its response to a magnetic ...