The dry magnetic separator is a magnetic beneficiation machine for sorting dry magnetic minerals. It is especially suitable for the separating magnetite, pyrrhotite, roasting ore, ilmenite and other materials with a particle size of 3mm or less, also applied for removal of iron from coal, non metallic minerals, building materials and other materials.
SHFRA MULTI ACTIVITIES Co. Ltd is a Sudanese Russian company working in import and export, general trading, general services, provides state of the art and...48 sec 1699
Introduction: A wet permanent magnetic separator for separating strong magnetic minerals Capacity: 24t/h 240t/h Improvement: Magnetic system materials adopt the NdFeB with high magnetic energy product and high coercivity, strong magnetic density and high affect depth; the surface of the cylinder is lined with Xinhai wear resistant rubber.
Its magnetic efficiency is well above 99%. The separator will efficiently handle large capacities of unsized ore from minus ¼ down to the finest dust. Control of the separator is simple, steady, and not critical. Feed rates may be varied over a wide range and practically the same results obtained.
magnetic separation. Dry Magnetic Separation of Iron Ore: There are many inherent advantages in processes that utilize dry magnetic separation to beneficiate iron ore. Wet concentration of magnetite ore, in comparison, re quires 500 to 1000 gal of water per ton of concen trate produced. This means extensive use of water
This separator provides efficient separation of non ferrous materials from 50mm down to 2mm particles over our 12, 18 and 24 pole rotor configurations. Lower your processing costs with our range of magnetic roll separators: Our magnetic roll separators refine and enhance magnetic separator machine designs for improved separation efficiency.